High Powered Scuba Diving Torch
- 2000 Lumens
- 3 CREE L2 Bulbs
- Max depth 50 metres
- Single magnetic switch
- Aluminium Alloy IPX8 material
- Anti slip grip
- Weight 235g
- Size 200x44x30mm
- Option to upgrade to Genuine top of the range Nitecore batteries
- 1 x Torch
- 2 x Rechargeable high powered genuine Fogstar 3400 mAh batteries
- 1 x Double X-Star Battery charger
These were one of our best sellers at the 2017 NEC Dive show
Please do not confuse this torch with some of the cheap rubbish for sale, be wary when someone quotes 1000’s of Lumens as most torches do not have the reflectors or components to reach anywhere near that level! this torch can reach a genuine 2000 lumens with a certificate of conformity from the manufacturer upon request.
The next problem is the quality of battery, cheap Chinese batteries and chargers which can cost as little as 50p for batteries and £2 for chargers wholesale but cause all sorts of reliability issues, we have tried and tested samples of many different sorts of batteries and chargers and found that the genuine Fogstar, Samsung or panasonic batteries overall all performed superbly so we now supply these as standard in all our torches.
The X-Star charger is a basic but reliable aftermarket charger and these is included as standard.
You can upgrade to the awesome Nitecore range of batteries or/and intelligent chargers with LCD read out this is not a cheap upgrade but check them out online if you are in any doubt of the price and quality of the Nitecore range.
Before use make sure the batteries are charged for a minimum of 8 hours.
Ensure both the head and tail O-rings are in place and that both head and tail sections are screwed tightly up against their stops DO NOT ATTEMPT TO TURN EITHER WHILST IN THE WATER, WHEN IN THE WATER ONLY USE THE OPERATING SWITCH FOR ON/OFF OR CHANGING MODES
This torch has 2 O-rings on the head and on the tail and when fully screwed tight and locked into place makes it virtually impossible to flood. Some torches turn on and off by turning the head or tail to operate, this torch has a magnetic switch so you move the switch to operate on/off and any other functions, IF THE HEAD OR TAIL ARE ROTATED WHILST UNDER WATER IT WILL FLOOD.
Before issuing a refund for a flooded torch it will be pressure and waterproof tested with head and tail pieces correctly fitted if it is found to operate correctly and the internals remains dry it will be assumed that it was either not closed properly prior to entering the water or that it was loosened whilst in the water for whatever reason and no refund will be given.
If you find your torch has flooded it is advised you do your own waterproof test first before sending back.
1) Allow the inside to completely dry
2) Make sure the head and tail are correctly tightened against the stops
3) Take on a dive do not exceed max depth
4) When back on surface unscrew head and tail and check for damp or water ingress
Any torch found to be faulty for any reason other than human error will be repaired or replaced within 1 month from purchase by us and then 12 month from purchase by manufacturer.
The manufacture TopCom has a certificate of conformity on all their products sold by Cands Diving Supplies Ltd